KIPSLC-8000-front

KIPSLC-8000-back

8000W SOLAR Pure Sine Wave Inverter - ( 48V )

  • LCD Display
  • 60AMP Built In Charger
  • 50AMP Solar Charger Regulator  

BRAND NEW – Includes All Accessory as following :

  • Battery Cables 
  • User Manual  

**** Made In Taiwan ***** 

      CE Certification 

Specifications:

  • Output Power Continuous: 8000W/8KVA
  • Max. Surge Power: 16000W
1.    Input Section 
  • Input Nominal Voltage: 220/230/240Vac
  • Acceptable Voltage Range:120V~270Vac
  • Low Voltage Transfer: 120Vac +/- 2%
  • Low Voltage Return: 130Vac +/- 2%
  • High Voltage Transfer:  270Vac +/- 2%
  • High Voltage Return: 260Vac +/- 2%
  • Input Frequency: 45Hz ~ 70Hz Auto-sensing
2. Output Section
  • Output Voltage:  220Vac / 230Vac / 240Vac re-settable via LCD panel
  • Waveform: Pure Sine Wave
  • Voltage Regulation (Batt. Mode): < 3% RMS for entire battery voltage range
  • Frequency Regulation (Line Mode): Synchronized to AC Main
  • Frequency Regulation (Batt. Mode) 50Hz or 60Hz +/- 0.1Hz
  • Power Factor: 1.0
  • Efficiency AC -AC: > 98%
  • Efficiency DC -AC: > 80%
  • Overload Protection (Line Mode): Circuit Breaker
  • Overload Protection (Batt. Mode): 110% ~ 150% for 30sec.; > 150% for 200ms, then Inverter Shuts Down

3. DC Start: Cold Start – Yes

4.Transfer Time: Typical < 8ms.

5.Battery Section

  • Voltage Range: 48VDC ( 42~62VDC)
  • Backup Time: Long time available. Base on the batteries connected
  • Max.Charging Current (5 steps selectable): 60AMP Built In Charger

6.Control Panel (LCD Display): 

   Inverter status, I/P & O/P Voltage Frequency, 

   Load Level, Battery Voltage & Level, Temperature,

   Model

   Control Panel (LED Display): 

   Normal (Green), Warning (Yellow), Fault (Red)

7. Solar Charge Regulator-Floating

  • Maximum Open Circuit Voltage: 100V
  • Maximum Charging Current: 50Amp

8. Audible Alarm

  • Battery Mode: Beeping every 4 seconds
  • Low Battery: Beeping every second
  • Inverter Fault: Beeping continuously
  • Overload: Beeping twice per second

9. Parameter Re-settable: Voltage, Frequency, 5 steps Charge current 

10. Environment

  • Operation Temperature: 0 ~ 40 degree C ; 32 ~104 degree F
  • Audible Noise: Less than 55dBA (at 1M)
  • Relative Humidity: 0-95% non-condensing

11. Physical (WXHXD): 415 x 600 x 260 mm

Features & Advantages

  • Un-limited load applicability
  • Un-limited batteries backup time
  • 24 hours operation on the Inverter
  • Multi-stage charger supports batteries up to 600AH.
  • Compatible with both linear & non-linear load.
  • Auto temperature control fan
  • Controllable & Removable panel with LCD
  • Parameter Pre-settable
  • Support solar panel
  • Low DC Voltage supports Office and Home appliances
  • DC start and automatic self-diagnostic function
  • High efficiency design to save electricity
  • Low heat dissipation in long time operation.
  • Designed to operate under harsh environment