KIPSLC-2400-back KIPSLC-2400-front

KIPSLC-2400-back

2400W ( SOLAR ) Pure Sine Wave Inverter ( 24V )

  • LCD Display
  • > 30AMP Built In Charger( Less than 50 amp) 
  • 50AMP Solar Charger Regulator 

BRAND NEW - Includes All Accessory as following :

  • Battery Cables 
  • User Manual  

MADE IN TAIWAN  -  CE Certification 

Specifications & Technology

  • Output Power Continuous: 2400W / 3.6KVA
  • Max. Surge Power: 4800W
1.    Input Section 
  • Input Nominal Voltage: 110/115/120Vac or 220/230/240Vac
  • Acceptable Voltage Range: 60V~135Vac or 120V~270Vac
  • Low Voltage Transfer: 60Vac +/- 2% or 120Vac +/- 2%
  • Low Voltage Return: 65Vac +/- 2% or 130Vac +/- 2%
  • High Voltage Transfer: 135Vac +/- 2% or 270Vac +/- 2%
  • High Voltage Return: 130Vac +/- 2% or 260Vac +/- 2%
  • Input Frequency: 45Hz ~ 70Hz Auto-sensing
2. Output Section
  • Output Voltage: 110Vac / 115Vac / 120Vac or 220Vac / 230Vac / 240Vac re-settable via LCD panel
  • Waveform: Pure Sine Wave
  • Voltage Regulation (Batt. Mode): < 3% RMS for entire battery voltage range
  • Frequency Regulation (Line Mode): Synchronized to AC Main
  • Frequency Regulation (Batt. Mode) 50Hz or 60Hz +/- 0.1Hz
  • Power Factor: 0.8
  • Efficiency AC -AC: > 98%
  • Efficiency DC -AC: > 80%
  • Overload Protection (Line Mode): Circuit Breaker
  • Overload Protection (Batt. Mode): 110% ~ 150% for 30sec.; > 150% for 200ms, then Inverter Shuts Down

3. DC Start: Cold Start – Yes

4.Transfer Time: Typical < 8ms.

5.Battery Section

  • Voltage Range: 24VDC (20~32VDC)
  • Backup Time: Long time available. Base on the batteries connected
  • Max.Charging Current (5 steps selectable): > 30AMP Built In Charger( Less than 50 amp) 

6.Control Panel (LCD Display): 

   Inverter status, I/P & O/P Voltage Frequency, 

   Load Level, Battery Voltage & Level, Temperature,

   Model

   Control Panel (LED Display): 

   Normal (Green), Warning (Yellow), Fault (Red)

7. Solar Charge Regulator-Floating

  • Maximum Open Circuit Voltage: 50V
  • Maximum Charging Current: 50A

8. Audible Alarm

  • Battery Mode: Beeping every 4 seconds
  • Low Battery: Beeping every second
  • Inverter Fault: Beeping continuously
  • Overload: Beeping twice per second

9. Parameter Re-settable: Voltage, Frequency, 5 steps Charge current 

10. Environment

  • Operation Temperature: 0 ~ 40 degree C ; 32 ~104 degree F
  • Audible Noise: Less than 55dBA (at 1M)
  • Relative Humidity: 0-95% non-condensing

11. Physical (WXHXD): 298 x 450 x 190 mm

Features & Advantages

  • Un-limited load applicability
  • Un-limited batteries backup time
  • 24 hours operation on the Inverter
  • Multi-stage charger supports batteries up to 600AH.
  • Compatible with both linear & non-linear load.
  • Auto temperature control fan
  • Controllable & Removable panel with LCD
  • Parameter Pre-settable
  • Support solar panel
  • Low DC Voltage supports Office and Home appliances
  • DC start and automatic self-diagnostic function
  • High efficiency design to save electricity
  • Low heat dissipation in long time operation.
  • Designed to operate under harsh environment

KIPSLC-1600

 

1600W ( SOLAR ) Pure Sine Wave Inverter ( 24V )

  • LCD Display
  • > 30AMP Built In Charger( Less than 50 amp) 
  • 50AMP Solar Charger Regulator 

BRAND NEW - Includes All Accessory as following :

  • Battery Cables 
  • User Manual  

MADE IN TAIWAN CE Certification 

Specifications & Technology

  • Output Power Continuous: 1600W / 2.4KVA
  • Max. Surge Power: 3200W
1.    Input Section 
  • Input Nominal Voltage: 110/115/120Vac or 220/230/240Vac
  • Acceptable Voltage Range: 60V~135Vac or 120V~270Vac
  • Low Voltage Transfer: 60Vac +/- 2% or 120Vac +/- 2%
  • Low Voltage Return: 65Vac +/- 2% or 130Vac +/- 2%
  • High Voltage Transfer: 135Vac +/- 2% or 270Vac +/- 2%
  • High Voltage Return: 130Vac +/- 2% or 260Vac +/- 2%
  • Input Frequency: 45Hz ~ 70Hz Auto-sensing
2. Output Section
  • Output Voltage: 110Vac / 115Vac / 120Vac or 220Vac / 230Vac / 240Vac re-settable via LCD panel
  • Waveform: Pure Sine Wave
  • Voltage Regulation (Batt. Mode): < 3% RMS for entire battery voltage range
  • Frequency Regulation (Line Mode): Synchronized to AC Main
  • Frequency Regulation (Batt. Mode) 50Hz or 60Hz +/- 0.1Hz
  • Power Factor: 0.8
  • Efficiency AC -AC: > 98%
  • Efficiency DC -AC: > 80%
  • Overload Protection (Line Mode): Circuit Breaker
  • Overload Protection (Batt. Mode): 110% ~ 150% for 30sec.; > 150% for 200ms, then Inverter Shuts Down

3. DC Start: Cold Start – Yes

4.Transfer Time: Typical < 8ms.

5.Battery Section

  • Voltage Range: 24VDC (20~32VDC)
  • Backup Time: Long time available. Base on the batteries connected
  • Max.Charging Current (5 steps selectable): > 30AMP Built In Charger( Less than 50 amp) 

6.Control Panel (LCD Display): 

   Inverter status, I/P & O/P Voltage Frequency, 

   Load Level, Battery Voltage & Level, Temperature,

   Model

   Control Panel (LED Display): 

   Normal (Green), Warning (Yellow), Fault (Red)

7. Solar Charge Regulator-Floating
  • Maximum Open Circuit Voltage: 50V
  • Maximum Charging Current: 50A  

8. Audible Alarm

  • Battery Mode: Beeping every 4 seconds
  • Low Battery: Beeping every second
  • Inverter Fault: Beeping continuously
  • Overload: Beeping twice per second

9. Parameter Re-settable: Voltage, Frequency, 5 steps Charge current 

10. Environment

  • Operation Temperature: 0 ~ 40 degree C ; 32 ~104 degree F
  • Audible Noise: Less than 55dBA (at 1M)
  • Relative Humidity: 0-95% non-condensing

11. Physical (WXHXD): 298 x 450 x 190 mm

Features & Advantages

  • Un-limited load applicability
  • Un-limited batteries backup time
  • 24 hours operation on the Inverter
  • Multi-stage charger supports batteries up to 600AH.
  • Compatible with both linear & non-linear load.
  • Auto temperature control fan
  • Controllable & Removable panel with LCD
  • Parameter Pre-settable
  • Support solar panel
  • Low DC Voltage supports Office and Home appliances
  • DC start and automatic self-diagnostic function
  • High efficiency design to save electricity
  • Low heat dissipation in long time operation.
  • Designed to operate under harsh environment

KIPSLC-800

 

800W ( SOLAR ) Pure Sine Wave Inverter ( 12V )

  • LCD Display
  • >20AMP Built In Charger( Less than 40 amp) 
  • 50AMP Solar Charger Regulator 

BRAND NEW - Includes All Accessory as following :

  • Battery Cables 
  • User Manual  

MADE IN TAIWAN CE Certification 

Specifications & Technology

  • Output Power Continuous: 800W / 1.2KVA
  • Max. Surge Power: 1600W
1.    Input Section 
  • Input Nominal Voltage: 110/115/120Vac or 220/230/240Vac
  • Acceptable Voltage Range: 60V~135Vac or 120V~270Vac
  • Low Voltage Transfer: 60Vac +/- 2% or 120Vac +/- 2%
  • Low Voltage Return: 65Vac +/- 2% or 130Vac +/- 2%
  • High Voltage Transfer: 135Vac +/- 2% or 270Vac +/- 2%
  • High Voltage Return: 130Vac +/- 2% or 260Vac +/- 2%
  • Input Frequency: 45Hz ~ 70Hz Auto-sensing
2. Output Section
  • Output Voltage: 110Vac / 115Vac / 120Vac or 220Vac / 230Vac / 240Vac re-settable via LCD panel
  • Waveform: Pure Sine Wave
  • Voltage Regulation (Batt. Mode): < 3% RMS for entire battery voltage range
  • Frequency Regulation (Line Mode): Synchronized to AC Main
  • Frequency Regulation (Batt. Mode) 50Hz or 60Hz +/- 0.1Hz
  • Power Factor: 0.8
  • Efficiency AC -AC: > 98%
  • Efficiency DC -AC: > 75%
  • Overload Protection (Line Mode): Circuit Breaker
  • Overload Protection (Batt. Mode): 110% ~ 150% for 30sec.; > 150% for 200ms, then Inverter Shuts Down

3. DC Start: Cold Start – Yes

4.Transfer Time: Typical < 8ms.

5.Battery Section

  • Voltage Range: 12VDC (10~16VDC) 
  • Backup Time: Long time available. Base on the batteries connected
  • Max.Charging Current (5 steps selectable): >20AMP Built In Charger( Less than 40 amp) 

6.Control Panel (LCD Display): 

   Inverter status, I/P & O/P Voltage Frequency, 

   Load Level, Battery Voltage & Level, Temperature,

   Model

   Control Panel (LED Display): 

   Normal (Green), Warning (Yellow), Fault (Red)

7. Solar Charge Regulator-Floating
  • Maximum Open Circuit Voltage: 25V
  • Maximum Charging Current: 50A 

8. Audible Alarm

  • Battery Mode: Beeping every 4 seconds
  • Low Battery: Beeping every second
  • Inverter Fault: Beeping continuously
  • Overload: Beeping twice per second

9. Parameter Re-settable: Voltage, Frequency, 5 steps Charge current 

10. Environment

  • Operation Temperature: 0 ~ 40 degree C ; 32 ~104 degree F
  • Audible Noise: Less than 55dBA (at 1M)
  • Relative Humidity: 0-95% non-condensing

11. Physical (WXHXD): 298 x 400 x 150 mm

Features & Advantages

  • Un-limited load applicability
  • Un-limited batteries backup time
  • 24 hours operation on the Inverter
  • Multi-stage charger supports batteries up to 600AH.
  • Compatible with both linear & non-linear load.
  • Auto temperature control fan
  • Controllable & Removable panel with LCD
  • Parameter Pre-settable
  • Support solar panel
  • Low DC Voltage supports Office and Home appliances
  • DC start and automatic self-diagnostic function
  • High efficiency design to save electricity
  • Low heat dissipation in long time operation.
  • Designed to operate under harsh environment.